How to do a data format

Owned by Janko Skinder
Last updated: Aug 30, 2023 by Žiga Dežman
1 min read

NOTE: Data format will erase data, configuration and factory configuration files!

Hard-reset or a factory format will downgrade your Linux version firmware to the original OS version.

For example: if your charger is installed with 4.0.4 firmware, a hard-reset will downgrade the firmware to 4.0.

Please note, in case you are using a Windows version of the charger, a hard-reset is equal to a Factory Reset. It will not change the firmware version, but only set the configuration back to factory configurations. If you wish to downgrade a Windows version (for example: from 1.13.9 to 1.13.6) you simply install 1.13.6 via WebUI.

 

How to do a hard-reset / factory format:

  1. reboot the charger via the service menu or the WebUI

  2. once the chargers start rebooting, press and hold the service button

  3. hold the service button, until “booting” shows up on the LCD screen of the charger