DLM – Advanced settings of the selected RS-485 meter type
- Landis+Gyr – EV Editor 1
Once the type of the RS-485 meter is specified in the Meter type field, the Advanced settings for the selected meter are displayed:
Address
Baud rate
Databits
Pairity
Stop bit
Tap on Advanced settings to collapse/expand the settings:
Advanced settings are collapsed.
Advanced settings are expanded.
Once you select your meter type from the dropdown list, the listed parameters can be pre-configured. However, the actual values of these parameters may differ from the pre-configured values. It's important to verify and set the correct actual values accordingly. For the correct actual values, refer to the meter documentation.
To edit values of the settings, tap the icon.
Ensure that the Address field is set to a unique value that is not already in use within the connected RS-485 network or bus segment. For information on configuring other settings, please refer to the meter documentation.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.