SIM status OK even though NO SIM is present

In case the SIM card is removed and inserted back while the charger is operating, then an incorrect status of the SIM card is shown and consequently the charger can’t communicate with the mobile network.

EXPLANATION:
The charger shows the right status when the SIM is removed, but when it is inserted back in then the status doesn’t change and because of this the network communication fails.

SOLUTION:
The SIM card should only be inserted or removed when the station is not operational. In case of any sort of manipulation with the SIM card is done when the charger is in operation then a reboot of the charger is needed.

 

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.


Landis+Gyr | Privacy Policy | Disclaimer