Quick tutorial on how to replace the Power board in INCH DUO
- Landis+Gyr – EV Editor 4
- Janko Skinder
Important to power off the charger at the main circuit breaker (the switches must be turned down in order for charger to power off (on the picture the switches are up and thus the charger is still powered up))
2. Remove the four screws (after disconnecting all the cables from the powerboard), this will remove the backplate, together with the powerboard
3. Lastly, unscrew the four screws to remove the powerboard from the backplate:
Additionally, you can use this picture when re-pluging the cable connections on the powerboard after you have swapped the powerboards (the charger must still be powered off)
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.