Synchronizing clock on Inch chargers
- Landis+Gyr – EV Editor 4
- Denis Leskovar
To use WSS (WebSocket Secure) charger must have synchronized time. Station normally uses NTP server to synchronize clock, but if station is under private APN you need to synchronize clock manually with computer connected to station. Second option is using private NTP server that is visible from charger.
For communication over secured connection both sides need synchronized clocks in order for certificates to be valid and secure connection, between backend and charger, can be established.
How to manually synchronize clock on charger:
Connect to charger interface with computer and open Settings menu.
Then go to Configuration
Click on Time and Regional settings
This will open submenu of Time and Timezone settings. If you want to synchronize time, click on button Synchronize time. This will synchronize time on charger with your computer time, or you can add your own NTP server in the field Time synchronization with Time (NTP) servers. Save settings and changes should be applied (Green pop-up will appear in upper right corner)
After successfully saving settings, you can reboot charger. After reboot, secure connection with backend should be working.
Â
Â
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.