Adding/Removing RFID card
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
1 – Swipe the RFID card in the area marked in green to add the it to your app. If your card is read successfully, you’ll hear a beep.
2 – To add an RFID card by code, enter the code manually here.
3 – Tap to open the list of compatible RFID cards. If the reader is unable to read your card, please check if your RFID card is compatible.
1 – Enter a name for your RFID card.
2 – Tap Confirm to save the card and add it to the whitelist.
1 – Card you chose for removal.
2 – Tap Remove to remove the selected card.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.