Phase configuration
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
- Landis+Gyr – EV Editor 1
Phase configuration allows you to match individual phases of the internal grid to the phase connectors of the charging station as they are actually connected.
STEP 1
Select the connection type of your charging station.
Tap Confirm.
STEP 2
1 – Match the grid phases to the connectors of the charging station as they are connected on the actual installation.
2 – Tap Confirm to save and apply changes.
Related content
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.