Installation manual for LTE ROUTER TELTONIKA RUT240
- Landis+Gyr – EV Editor 4
- jasmin.kljajic
- Janko Skinder
- Žiga Dežman
Â
Please follow this step-by-step guide for installing LTE Router Teltonika RUT240
Â
Remove the cover plate (5 screws, some older chargers were made without the cover plate)
2. Insert router on the upper rail. Connect router on power supply (red wire → V+, black wire →V-)
3. Connect router and ARM board with UTP cable. Connect antennas and secure wires.
4. Cover the canals and screw the cover plate back on
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.