G6 IEC modul replacement
- Landis+Gyr – EV Editor 4
- jasmin.kljajic
- Landis+Gyr – EV Editor 1
 Problem
car connected to station but not communicating with station
no electrical feedback (seen in logs or in backend)
socket not working
 Solution
replace old IEC modul with new one. New one comes with new UTP cable which must be replaced also! Part number H-1013 IEC module with housing
Attached document to new part is available here.
DO NOT USE other cable, because it will damage the IEC modul or other components in the station.
Â
Â
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.