Add a new charging station to the app
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
- Landis+Gyr – EV Editor 1
After selecting Add new charging station, follow the app's instructions, which will guide you through the steps to add a new charging station.
1. Enter required data in the Add new charging station screen.
1 – Enter a name for the charging station.
2 – Address used by the app’s auto-connection feature. This is a mandatory field.
When the app is open, it will detect your current location and attempt to connect to a charging station that is closest to you.
Even though this is an input field for an address, you can enter any description of the location you deem appropriate.
3 – GPS position icon. By tapping it, the app will enter an address closest to your current location in the input field.
After entering required data, confirm by tapping Next.
2. Scan QR code of the charging station.
You are prompted to scan a QR code located in the INCH Core charging station you are adding to your app.
1 – Capture area helps you controlling scan of QR code
2 – Manually enter the device ID (provided by your vendor or obtained by scanning the QR code)
3 – Switch phone’s light on/off
3. Enable Location and Bluetooth.
If Location and Bluetooth on your phone system are disabled, you will be prompted to turn them on.
Adding a charging station from a link
If someone share you a charging station with you, you will receive an e-mail with a link for adding the station to your app.
Tap the link from the received e-mail.
The Add a new charging station screen opens.Tap Confirm to add the shared charging station to the Charging stations list in your app.
Once the shared charging station is added to your app, you can change its name and address (the change applies only in your app).
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.