Adding/removing limits
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
- Landis+Gyr – EV Editor 1
- Rok Potočnik
1 – Select the days this limitation will apply to.
2 – Tap Next to confirm.
3 – Set the time your limitation will start taking effect.
4 – Set the time your limitation will stop taking effect.
5 – Set the limit amperage value for your charging session.
6 – Confirm selected settings.
If needed, you can create a single limit block that extends past midnight, continuing into the next day or beyond.
Related content
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.