Firmware update
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
Â
Automatic firmware update
Â
Firmware update notifies you when a new firmware version is available.
Â
1 – Notification that a new firmware update is available.
2 – Tap to decline the firmware update. This will snooze the notification for a month.
3 – Serial number and location of the device this firmware update applies to.
4 – Tap to accept and download the firmware update.
Â
When the firmware update is successfully installed, the charging station will need to restart.
Â
Â
Â
Â
Â
If you are currently not connected to your charging station, the firmware update will be stored in your phone’s local storage. The update will prompt you to install once a connection to the charging station is established.
Â
Manual firmware update
Â
Â
Â
Â
1 – Serial number and location of the device this firmware update applies to.
2 – Tap to select a firmware update file from the smartphone’s local storage.
When the firmware update is successfully installed, the charging station will need to restart.
Â
Â
Â
Â
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.