Static connector limits
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
- Landis+Gyr – EV Editor 1
A single phase installation will only show one phase setting.
An edit icon is displayed next to the value only if you have permission to modify it; otherwise, the value is read-only.
1 – Based on the way your charging station is connected to your internal grid, it can detect if it is a single or a three phase installation. Connection for each phase is listed below.
2 – Tap Phase configuration to reassign connections for each phase.
3 – Toggle to choose whether the static limit applies to all phase configurations.
The options below allow you to set a separate limit for when the charging station is charging in a single- or a three-phase mode.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.