Safety at Maintenance
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
Â
The same safety measures and precautions that apply to the installation of the product must be observed:
when servicing the product
when removing the product.
Cleaning the charging station is allowed with a cloth and water / water-based / alcohol-based cleaners. Do not use solvent-based cleaners.
Cleaning is allowed only on the outer part of the station. Cleaning is forbidden:in the region where cables are connected to the station
to the charging connector,
to the socket of the charging station.
Â
CAUTION
The charging station can be maintained and repaired by qualified personnel only.
Â
DANGER
Avoid hazardous risks. Only the manufacturer, an authorized service technician, or technically qualified personnel may replace a damaged charging station or its components.
Â
DANGER
The power supply of the charging station must always be switched off during maintenance and repair.
Â
At the end of its lifetime, the charging station should not be disposed of as urban waste. It should be treated according with WEEE Directive 2012/19/EU.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.