Safety at Handling and Mounting
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
Â
Carefully unpack the product from the packaging. This should prevent the product from falling and causing exterior or internal damage and personal injury.
Always inspect the product before proceeding with installation. If the product is damaged or not as presented in the user documentation, DO NOT proceed with installation. Contact the seller and return the product.
In case of accidental damage before installation (drop, hit) we recommend that you do not proceed with installation. Contact the seller and return the product.
Â
DANGER
Accessing the internal parts of the charging station is strictly prohibited as it poses a significant threat to one's life.
Â
DANGER
In case of any presumed damage inside the charging station (fire, explosion...), do not install, power-up or use the station.
Â
CAUTION
The charging station is intended only for the charging of electric vehicles and must not be used to charge other appliances or for any other purpose. Any misuse of the charging station can lead to hazards to personal health and safety or property safety and damage.
Â
WARNING
Safety measures should be observed at all times.
Â
All cases where symbol is marked should be examined to determine the nature of the potential hazards and any measures to be taken to avoid them.
The charging station installation procedure is described in the charging station documentation. For safety reasons, the instructions should be followed.
Â
Charging stations are ready and tested for use with the Type 2 certified connectors. Use of any other connector or converter may result in damage to the charging station, vehicle, or property, or pose a risk to the health and safety of the user.
Always choose original additional equipment.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.