Charging plug of the Output cable module

Owned by Landis+Gyr – EV Editor 1
Last updated: Mar 06, 2024
1 min read

Charging plug

The charging plug is equipped with a female Type 2 connector, which complies with the IEC 62196 standard.

 

ChargingPlug_Numbers.png

 

 

1 – Charging cable

2 – Charging handle

3 – Protective cap for the connector of the charging handle

4 – Safety cord of the protective cap

 

 

Charging plug connector

The charging plug connector type:

  • female

 

Charging plug connector_Type2.png

 

1 – CP

2 – PE

3 – PP

4 – L1

5 – L2

6 – L3

7 – N

 

 

 

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.

Landis+Gyr | Privacy Policy | Disclaimer