MyINCH: How to set charging station RFID authorization

Charging station authorization options can be set in the MyINCH web interface. One of the options is authorization with an RFID card.

 

  1. Connect to the charging station’s MyINCH web-interface.

  2. Click the navigation menu in the top left corner.

  3. Select Configuration.

  4. On the User tab, click the drop-down arrow and choose Charging authorization. On the right panel, Charging authorization options appear.

  5. Under Supported Identification Types, enable RFID by ticking the Enabled checkbox.
    If needed, enable the other two options:
    - Revert Tag ID bytes – an option used by some central system operators that read tag ID bytes in the reverse order.
    - Stop session directly – used when the user wants to stop the charging session by swiping the RFID card.

  6. Scroll down to the bottom of the panel and click Save.
    Because the settings were changed, the charging station now needs to be restarted.

  1. Return to the navigation menu and select Diagnostics / Restart device. In the pop-up window, confirm with Yes.
    Wait for the station to carry out the restart.

  2. After the restart, open MyINCH web interface and re-connect to the charging station.

10. Open the navigation menu.

11. Select the Configuration tab.

12. On the User tab, click the drop-down arrow and select Local users. On the right panel, Local users options appear.

13. To add a new local user, click Add new. The My profile pop-up window appears.

14. In the pop-up window, enter First name and Last name and click Save.

To prevent the chosen user from accessing the charging station, tick the Blocked (prevent access) checkbox. The User identifications pop-up window appears.

15. In the pop-up window, click Add and then select Register card now by swiping it.

There are also two additional options for adding identification:

- Get card from past failed authorizations – Select an RFID card from failed authorizations that are stored on the charging station.
- Add it manually – Manually input the RFID tag ID bytes.

A pop-up window appears, prompting you to swipe the new RFID card.

16. Swipe the desired RFID card on the charging station to hear a beeping sound and click I did it.

17. In the next window, click Select next to the appropriate RFID card ID to view and edit details such as card status, card number, expiration date.
Click Save to confirm and then close the User identifications window.
The newly added user will appear on the right, under Local users.

By selecting the card icon next to the name of the user, you can view and edit all identifications for the chosen user.

You are now able to authorize with the selected RFID card and start charging.


More resources

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.


Landis+Gyr | Privacy Policy | Disclaimer