Algodue energy meter configuration
- Landis+Gyr – EV Editor 4
- jasmin.kljajic
- press bottom button until you see SETUP on meter screen
- press and hold bottom button until you see ADDR 01
- use bottom button to select value you want to change and upper button to change value
- configure upper meter to ADDR 03 and BAUD 9,6
- after value change press and hold bottom button until you see SAVE on screen and use bottom button to confirm
- configure bottom meter ti ADDR 04 and BAUD 9,6
- after value change press and hold bottom button until you see SAVE on screen and use bottom button to confirm
Configuration - web interface G6:
Station view:
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.