End user interface

1 – Charging station status LED indicator

2 – Authentication LED indicator

3 – Supplementary LED signaling

4 – Touch button

Charging station status LED indicator

The LED indicator (1) can emit green (, ), blue ( ), or red ( ) light. It can be steadily ON, pulsing, or OFF.

Authentication LED indicator

The LED indicator (2) emits white light. When active, the LED is pulsing.

Supplementary LED signaling

Three LED indicators (3) emit white light. When active, the LEDs are pulsing.

Status	Indication of the LEDs	(1) LED	(2) LED	(3) Supplementary LEDs	Sound	Meaning	Action needed	Result

Status	Indication of the LEDs	(1) LED	(2) LED	(3) Supplementary LEDs	Sound	Meaning	Action needed	Result
Authentication / Authorisation		OFF	Flashing	OFF		The charging station is available and is waiting for authentication/authorisation before proceeding.	Do the authentication. Use one of the following method: Approach your RFID card to the area of the LED indicators and button. Open the INCH Core App on your mobile device while standing in proximity to the charging station. Make sure that Bluetooth connection is enabled on your mobile device.	Authentication/Authorisation: passed or rejected
Loading		OFF	OFF	All the LEDs pulsing in waves from left to right and back to left, loading animation		The charging station is waiting due to a checking process (e.g., authentication, authorisation, upgrading firmware)	No action is needed.
Accepted, confirmed, passed		OFF	OFF	All the LEDs simultaneously pulse once		accepted, confirmed, passed	No action is needed.
Declined, rejected		OFF	OFF	All the LEDs simultaneously pulse twice		declined, rejected	No action is needed.
Ready to charge		Green LED is flashing	OFF	OFF		The charging station is available and ready for charging. Authorisation is already completed or not required.	Plug the charging cable into your vehicle and the charging station (if not already done so).	Charging starts shortly after both ends of the charging cable are properly connected.
Preparing to start charging		Green LED is ON	OFF	All the LEDs are pulsing in a wave from left to right, loading animation		The charging station communicates with the EV and vice versa just before charging starts.	No action is needed.	After completing the charging station and vehicle preparation, the charging session starts.
Charging session		Blue LED is ON	OFF	All the LEDs are pulsing in a waves from left to right Animation speed is higher when charging is in fast mode.	at the charging session start	The charging station is charging; the charging is in progress.	No action is needed unless you want to: stop charging manually change charging mode from interactive to fast and vice versa	Charging in progress until interrupted/stopped by the vehicle or charging station. The charging mode is changed from interactive to fast or vice versa if you changed the charging mode.
Charging paused by EV		Blue LED is ON	OFF	All the LEDs are pulsing rapidly and simultaneously Animation speed is higher when charging is in fast mode.		Charging is paused by EV: EV battery is fully charged EV Schedule setting	Unplug the charging cable if you want to stop the charging session. If the session is paused by the EV Schedule and you want the session to continue, no action is needed. In this phase, you can change charging mode from interactive to fast and vice versa.	The EV’s battery is fully charged. If the EV Schedule pauses the charging session, it will automatically resume once permitted by the schedule. The charging mode is changed from interactive to fast or vice versa if you changed the charging mode.
Charging paused by the charging station		Blue LED is ON	OFF	The 1st LED on the left is pulsing Animation speed is higher when charging is in fast mode.		Charging is paused by the charging station due to: Set schedule, Schedule from a central system, Feedback communication from Core Load Guard, Derating charging current.	Unplug the charging cable if you want to stop the charging session. If you want the session to continue, no action is needed. In this phase, you can change charging mode from interactive to fast and vice versa.	The EV’s battery is partially or fully charged. When the conditions for continuing the charging session are met, charging continues automatically. The charging mode is changed from interactive to fast or vice versa if you changed the charging mode.
Charging station is unavailable		OFF	OFF	All the LEDs are OFF		Indicates the charging station is unavailable because there is no power.	There can be many reasons for power outage. For more information, you can contact your seller’s support.
Charging station is in fault		Red LED is ON	OFF	All the LEDs are OFF		Indicates the charging station is set to unavailable. Check the Troubleshooting.	If the charging station is set to unavailable, you can enable it via the INCH Core app.
Charging station is in fault	Example:	Red LED is ON	OFF	One or more of the LEDs are pulsing *		Indicates the specific error that occurred. Check the Troubleshooting topic.	Depends on the type of error that occurred. Check in the Troubleshooting topic which action is needed.	Depends on the type of error that occurred. Check in the Troubleshooting topic.

* Depends on the type of error occurred. Check in the Troubleshooting topic.

Touch button

The touch button can be used by lightly touching the button for a short time.

By using the touch button, you can switch between Interactive and Fast charging modes. You can change the mode only when the Charging station status LED indicator emits blue – .