Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

When adding a new RFID card or key-fob, this dialog box appears.

10-7_Connection-lost-authentication.png

1 – Take the RFID card you want to add to the app and swipe it on the charging station’s RFID reader in the area marked on this image in green. If your card is read successfully, you’ll hear a beep.

2 – If you are adding an RIFD card by code, you can enter the code manually in this input field.

3 – If the reader is unable to read your card, please check if your RIFD card is compatible. You can find the list of compatible cards by following this link.


Dialog_Change-password_2.png

A – Once your RFID card is scanned, you can give it a name so it is easier for you to recognise it on the list. Enter the desired name or label for this card here.

B – Once you have entered the name, tap Confirm to save the card and add it to the whitelist.


If you decide to remove an RFID card from the whitelist, you’ll be presented with this dialog box.

Dialog_Change-password_3.png

C – The card you are removing will be shown here so you can be sure which card you are removing.

D – To remove the card shown, tap Remove.

  • No labels