Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

NI ŠE AKTUALNO

Phase configuration allows you to match individual phases of the internal grid to the phase connectors of the charging station as they are actually connected.

A single phase installation will only show one phase setting.

Dialog_Phase-configuration.png

1 – Match the grid phases to the connectors of the charging station as they are connected on the actual installation.

2 – Tap Confirm to save and apply changes.

  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.

Landis+Gyr | Privacy Policy | Disclaimer