How to upgrade the firmware in MyINCH interface
First connect to the chargers MyINCH interface. Please check this article on how to connect to the charger: https://etrelchargingsolutions.atlassian.net/wiki/spaces/Home/pages/2236514315
Once connected to the MyINCH interface, open the navigation menu in the top left corner and select “Diagnostics” sub-menu:
Next, select the option “Upgrade firmware”:
And select the appropriate file (please note, always first install the system file and only then the application file):
Click “Save” and wait for the charger to reboot.
You can check what firmware is installed on the bottom of the Diagnostics menu:
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.