Fire Safety Measures
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
Â
Provision of required fire safety measures is necessary, according to national legislation and local regulations and guidelines.
For fire safety measures when planning the installation and using EV charging products, consult your local fire safety regulations and/or local fire safety expert. In case of a fire, consult the building fire safety plan and general recommendations when dealing with electrical fires.
Â
The enclosure and the assembly design of the charging station ensure complete user safety by preventing any contact with hazardous parts. In cases where temperature inside the station rises excessively, charging power is reduced or even stopped until the temperature drops.
Â
DANGER
The charging station is not intended for installation in hazardous zones and must be installed outside hazardous areas. Always ensure the wiring is done according to relevant national guidelines and the wires are undamaged and properly protected.
Â
Â
DANGER
In case of any evident external damage or presumed internal damage (due to fire, explosion, etc.), do not attempt to use or access the station in any manner.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.