Wi-Fi Connection
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 1
1 – Network to which the charging station is currently connected to.
2 – Other available networks.
3 – Tap Add network manually to manually add a network for connection if a network you are trying to connect to is hidden or not listed.
4 – Tap Connect via WPS to connect to a network via WPS if your network router supports it.
A – Signal strength indicator 
B – Network name
C – Network status
D – Connection indicator 
Network configuration and details
1 – Network name.
2 – Network status.
3 – Tap Disconnect network to disconnect from this network.
4 – Toggle to enable/disable DHCP (Dynamic IP) on this network.
5 – If DHCP is disabled, custom IPv4 and IPv6 settings can be set.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.