| Single-phase or three-phase EV charging station for any electric vehicle with a Type 2 charging connector (identifier C). |
Electrical characteristics |
Single-phase device | Input | 230 V~; 1W+N+PE; 50/60 Hz; 32 Amax; 7.4 kW |
Output | 230 V~; 1W+N+PE; 50/60 Hz; 32 Amax; 7.4 kW |
Three-phase device | Input | 230/400 V~; 3W+N+PE; 50/60 Hz; 32 Amax; 22 kW |
Output | 230/400 V~; 3W+N+PE; 50/60 Hz; 32 Amax; 22 kW |
Types of system earthing | TN, TT |
Rated impulse withstand voltage (Uimp) | 2500 V – OVC II (4000 V and OVC III is achieved with installed SPD) |
Rated insulation voltage (Ui) | 230/400 V |
Rated current of each circuit (Inc) | 32 A |
Rated peak withstand current (Ipk) | 4500 A |
Rated conditional short-circuit current of assembly (Icc) | 3000 A |
Rated short-time withstand current (Icw) | 3000 A |
Rated diversity factor (RDF) | |
Device power consumption | 10–15 W (highest measured value of full configuration) |
Environmental characteristics |
Ingress protection | IP56 |
Impact protection | IK10 |
Protection class | Class I equipment |
Pollution degree | Pollution Degree 3 |
Electromagnetic compatibility (EMC) | |
Frequency bands and radio power |
Wi-Fi | Frequency band: 2.4 GHz Transmitting power: Up to 20.5 dBm (adjustable) |
Sub-GHz | Frequency bands: 169 MHz, 410–510 MHz, 868 MHz, or 915 MHz Transmitting power: 14 dBm |
RFID module | Frequency band: 13.56 MHz (HF) Transmitting power: up to 8 dBm (ISO 14443 and ISO 15693) |
Other classification and characteristics |
AEVCS | Assembly intended for charging stations for electric vehicles |
Installation location | Indoor and Outdoor |
Mounting method | Stationary equipment, Wall-mounted assembly |
Location accessibility | Location with restricted access or non-restricted access |
Mechanical resistance | Medium/High |
Installation | Must be performed by qualified personnel |
Operation | Allowed to ordinary persons |
Electrical installation protection | Short-circuit protective device(s): Appropriate MCB or fuse must be part of electrical installation, installed upstream of the charging station. Protection against electric shock: Appropriate RCD must be part of electrical installation, installed upstream of the charging station.
|
Dimensions |
Dimensions of assembled charging station (in mm) | H2 - to the bottom of the cable gland with a spiral |
Main unit + Dock | 257 × 273 × 115 (W × H1 × D) |
Main unit + Output socket + Dock | 257 × 401 × 115 (W × H2 × D) |
Main unit + Output socket shutter + Dock | 257 × 413 × 120 (W × H2 × D) |
Main unit + Output Cable + Dock | 257 × 387 × 115 (W × H2 × D) |
Mass |
Mass (assembled charging station) | 3.4 kg to 7 kg (depending on the configuration and cable length) |
Temperature |
Operational | -25 °C to +85 °C |
Ambiental | -25 °C to +50 °C |
Storage | -30 °C to +85 °C |