Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

External-fiscal-meter_2.png

1 – Based on the way your charging station is connected to your internal grid, it can detect if it is a single or a three phase installation. Connection for each phase is listed below.

2 – Tap Phase configuration to reassign connections for each phase.

3 – Toggle to choose whether the static limit applies to all phase configurations.

(blue star) The options below allow you to set a separate limit for when the charging station is charging in a single or a three phase mode.

book_info.png

The charging station installed as a three phase charging station will switch to the single phase mode if the total power current drops to below <6A>.

→ TO BO AKTUALNO ŠELE, KO DEVELOPMENT USPE NAREDITI PHASE SWITCHING

→ če tok pade pod 6 A, polnilna postaja (to je standard in velja tudi za INCH in DUO)

  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.

Landis+Gyr | Privacy Policy | Disclaimer