The Manage load schedule page enables you to create and manage your personalised load schedule, allowing you to offset your charging to a lower tariff time-frame or simply limit it it to a lower amperage level. Limitations can be set in hourly increments and can either reduce the maximum charging power allowed or disable charging completely.
1 – Currently applicable load schedule.
2 – Line showing the current day and time, indicating currently active limitation blocks.
3 – Limitation block indicating that there is a charging limitation in place at that specific date and time.
4 – Add a new limitation block to the load schedule.
5 – Load schedule configuration.
.png?version=1&modificationDate=1707813311449&cacheVersion=1&api=v2&width=36&height=120){kind=small}
Limitation block indicating that charging in this specific timeframe is disabled. If a charging session is active, it will be paused.
.png?version=1&modificationDate=1707813314188&cacheVersion=1&api=v2&width=36&height=120){kind=small}
Limitation block indicating that charging is limited in this specific timeframe. In this case, it is limited to 12 A.
.png?version=1&modificationDate=1707813321719&cacheVersion=1&api=v2&width=36&height=120){kind=small}
To remove a limitation block, tap it. It will turn into a block as shown on the image. Tap again to confirm removal from the load schedule.