Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

This is a configuration page used to set up the connection of your charging station to an external charging meter, usually used for precise metering and fiscalisation.

External-fiscal-meter_1.png

1 – Select the type or model of the meter you are connecting to. This will allow for seamless communication between the meter and the charging station.

2 – The state of your connection to the fiscal meter is shown in the status line.

3 – This is a set of advanced settings that allows you to fine tune your metering connection.

book_info.png

Note that the charging station will have to restart in order for configuration changes to take effect.

  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.

Landis+Gyr | Privacy Policy | Disclaimer