The Manage load schedule page enables you to create and manage your personalised load schedule, allowing you to offset your charging to a lower tariff time-frame or simply limit it it to a lower amperage level. Limitations can be set in hourly increments and can either reduce the maximum charging power allowed or disable charging completely.
1 – The currently applicable load schedule is shown in the centre of the page. It can be scrolled up and down to see it in its entirety.
2 – The line shows the current day and time, indicating which limitation block, if any, is currently active.
3 – An example of a limitation block. These blocks indicate that there is a charging limitation in place at that specific date and time.
4 – Add a new limitation block to the load schedule.
5 – Kaj omogoča ta switch?
.png?version=1&modificationDate=1707813311449&cacheVersion=1&api=v2&width=36&height=120){kind=small}
.png?version=1&modificationDate=1707813314188&cacheVersion=1&api=v2&width=36&height=120){kind=small}
.png?version=1&modificationDate=1707813321719&cacheVersion=1&api=v2&width=36&height=120){kind=small}
This limitation block indicates that charging in this specific timeframe is disabled. The charging session will be paused if a session is active.
This limitation block indicates that charging is limited in this specific timeframe. In this case, it is limited to 12A.
To remove a limitation block, tap on it. It will turn into a block, such as this one. To confirm removal, tap it again. It will be removed from the load schedule.