Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Add new device.png

When you are located at a specific location, tap Add new device at the bottom of the page to add a new charging station to the app.

Doing so will open a scanner for scanning the QR code underneath the front cover of the charging station. The QR code is the basic key that the app needs to authenticate the connection to the charging station.

Add new device_Bluetooth.png

Once scanned, the app will try to connect to the new charging station using the scanned QR code via the Bluetooth connection. Make sure to have the Bluetooth connection enabled on your mobile phone.

To connect to Bluetooth, tap Enable.

If the connection is successful, you will be presented with the charging station’s installation dashboard. Once you attach the front cover to the charging station, the dashboard will switch to the standard, end-user mode.

  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.

Landis+Gyr | Privacy Policy | Disclaimer