Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

The housing of the Main unit including the front cover and the back part of the module is made of self-extinguishing high-quality polycarbonate.

The default housing colour of the Main unit module is light grey (RAL 7001). The colour of the module’s back part is black (RAL 9005).

Front view

1 – User interface

2 – Front cover

3 – Screw point / Tamper-proof screw point

4 – Snap fit opening (top, bottom)

5 – Breakable plastic part covering the top/bottom entry point

Back view

1 – Snap fit opening (top, bottom)

2 – Breakable plastic part covering the top/bottom entry point

3 – Rubber gasket

4 – Inlet mating pins: Electrical inputs

5 – Contact springs: Auxiliary power supply, RS-485 communication

6 – Outlet mating pins: Electrical outputs

7 – Contact springs: Charging cable locking mechanism, Locking plug (for Output socket module only), Proximity Pilot (PP), Control Pilot (CP)

Screws

The front cover is locked with a screw (by default) or with a tamper-proof screw (option); both are made of stainless steel.

  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.

Landis+Gyr | Privacy Policy | Disclaimer