When adding a new RFID card or key-fob, this dialog modal appears.
1 –
Swipe the RFID card
in the area marked
in green to add the it to your app. If your card is read successfully, you’ll hear a beep.
2 –
To add an RFID card by code,
enter the code manually
here.
3 – Tap to open the list of compatible RFID cards. If the reader is unable to read your card, please check if your
RFID card is compatible.
A – Once your RFID card is scanned, you can give it a name so it is easier for you to recognise it on the list. Enter the desired name or label for this card here.
B – Once you have entered the name, tap
1 – Enter a name for your RFID card.
2 – Tap Confirm to save the card and add it to the whitelist.
If you decide to remove an RFID card from the whitelist, you’ll be presented with this dialog modal.
C – The card you are removing will be shown here so you can be sure which card you are removing.
D – To remove the card shown, tap Remove
1 – Card you chose for removal.
2 – Tap Remove to remove the selected card.