Content Comparison

After the physical and electrical installation of INCH and INCH Duo chargers you need to go through the basic setup of the charging station in the MyINCH web interface. If not, we recommend that you watch the MyINCH intro video first.

First The first configuration is always done with INCH and or INCH Duo connected directly to a PC or LAN network with an ethernet cable. After that you need to open the web browser of your choice on your device, and enter either IP address or serial number dot local in the address bar. After that it will present a login page of the INCH charger, and we can connect to it using the default credentials root@etrel.com and t o o r as password.

After login you will be presented with the dashboard view and we can start with the basic setup of the INCH charger.

Configuration The configuration is basically the same for INCH and INCH Duo , The only major difference is setting up the second connector that exists on the INCH Duo.

All the basic configuration is done in the Configuration submenu, accessible throuh through the menu button on in the top left corner.

First we need to setup device mode of Charger. For INCH chargers there are 3 options, Home charger, Private or Public and Custom.

...