Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

WIFI Connectivity_1.png

1 – Network to which the charging station is currently connected to.

2 – Other available networks.

3 – Choose Add network manually connect to it manually if a network you are trying to connect to is not listed or if it is hidden.

4 – Tap Connect via WPS to connect to a network via WPS if your network router supports it.

WIFI Connectivity_2.png

A – Signal strength indicator wifi1.png wifi2.png wifi3.png

B – Network name

C – Network status wifi-connected.png Connected wifi-connection-lost.png Connection lost

D – Connection indicator

E – Network configuration and details

WIFI Connectivity_3.png

1 – Network name.

2 – Network status.

3 – Tap Disconnect network to disconnect from this network.

4 – Toggle to enable or disable DHCP (Dynamic IP) on this network.

5 – If DHCP is disabled, custom IP4 and IP6 settings can be set.

  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.

Landis+Gyr | Privacy Policy | Disclaimer