Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Did you remove cable cover and water came out?

Please be aware that the cover of the Type 2 cables is for dust protection only; it does not serve to repel water. Furthermore, the entered water in the cable cover does not cause safety issues for operation of the charging station or the use of the charging cable.

The two domes (PP + CP) in the cover ensure that electrolysis is not possible. Additionally, the amount of the water can be reduced by changing the “holding” position of the charging cable – the charging cable shouldn’t hang upside-down, we recommend a horizontal “holding” position.

  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.

Landis+Gyr | Privacy Policy | Disclaimer