Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

Charging plug

The charging plug is equipped with the Type 2 connector.

1 – Charging cable

2 – Charging handle

3 – Protective cap for the connector of the charging handle

4 – Safety cord of the protective cap

Charging plug connector

The connector type is Type 2.

1 – CP

2 – PE

3 – PP

4 – L1

5 – L2

6 – L3

7 – N

The connector is equipped with two symbols located on the upper side of the connector housing:

  • identifier C – Type 2 charging connector (IEC 62196 standard)

  • UKCA marking – Type 2 charging connector being placed on the market in EU and Great Britain (England, Scotland and Wales).

The connector is equipped with two symbols located on the upper side of the connector housing:

  • identifier C – Type 2 charging connector (IEC 62196 standard)

  • UKCA marking – Type 2 charging connector being placed on the market in EU and Great Britain (England, Scotland and Wales).

  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.

Landis+Gyr | Privacy Policy | Disclaimer