Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Step-by-step guide

Hardware installation

  1. remove back panel and insert SIM card as shown in photo. Then put back the panel and attach LTE and WiFi antennas
  2. Connect the power adapter to the socket on the front of the device. Then plug the other end of the power adapter into the power socket.
  3. connect to the device wiressly (SSID: Telktonika_Router) or use Ethernet cable and plug it to any LAN port

Configure your computer (Windows):

  1. enable the wireless network connection (go to Start - Control Panel - Network and Internet - Network and sharing center. In the left panel click Change adapter settings link. Right click on Wireless networ Connection and select Enable).
  2. setup wireless network adapter on your computer (right click on Wireless network connection and select Properties. After that select Internet Protocol version 4 (TCP/IP) and click Properties).
  3. select Obtain IP adress automatically and Obtain DNS server address automatically if they are not selected. Click OK.
  4. right click on Wireless network connection and select Connect to see available wireless networks.
  5. choose the wireless network Teltonika_Router from the list and click Connect.

Login to device

  1. to enter router Web interface type http://192.168.1.1 in your browser
  2. use default username: admin and password: admin01 when prompted for authentication. In version RUT9XX_R_00.05.00.5 you will be asked to change password before you can continue.
  3. Click System - Administration and choose Access Control:
  4. click Services - Auto reboot
  5. click Network - Firewall and then Port forwarding. If you have more charging station connected to the same router you will have to make more forward rules to each station. In that case you will also have to change IP of the charging station.
  6. click Network  - LAN. You can change router IP here if needed. Go to Advanced settings after that
  7. click -Network - Wireless and disable this option if not needed
  8. click Network - Mobile and configure APN settings
  9. click Status - Overview. If your APN settings are correct you will see IP and mobile state:
  10. If you want to change password or router name click System - Administration










  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.

Landis+Gyr | Privacy Policy | Disclaimer