Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

The configuration page used to configure and set up the charging station’s WIFI connectivity.

WIFI-Connectivity_1.png

1 – The network to which the charging station is currently connected to is listed at the top of the page.

2 – Other networks that are available to the charging station but to which it is not connected to are listed below.

3 – If a network you are trying to connect to is not listed or if it is hidden, you can connect to a network manually.

4 – You can connect to a network via WPS if your network router supports it.

WIFI-Connectivity_2_Item.png

A – Signal strength indicator wifi1.png wifi2.png wifi3.png
B – Network name
C – Network status wifi-connected.png Connected wifi-connection-lost.png Connection lost
D – Connection indicator
E – Network configuration and details

WIFI-Connectivity_3.png

1 – Network name

2 – Network status

3 – To disconnect from this network tap Disconnect network

4 – You can enable or disable DHCP (Dynamic IP) on this network

5 – You can set your custom IP4 and IP6 settings if DHCP is disabled

  • No labels