Packaging
- Landis+Gyr – EV Editor 1
- Landis+Gyr – EV Editor 1
- Landis+Gyr – EV Editor 4
- Landis+Gyr – EV Editor 4
Each module of the INCH Core charging station is packed separately in a box. All module packages are packed in a so-called charging station system package, which can also include optional accessories, Load Guard, or any other part of the charging system (depending on the customer order).
In the charging station system package, at least the following is packed:
Module 1 – Dock in the 1/3 package box
Module 2 – Output in the 2/3 package box (one of the Output socket or cable model)
Module 3 – Main unit in the 3/3 package box
INCH Core module 1/3 – Dock
Box dimensions in mm (L × W × H): 290 x 290 x 72.5
Content:
1x Dock module
3x SPAX 5 × 70 mm screw (for mounting the Dock to the mounting surface)
3x M6 washer (for mounting the Dock to the mounting surface)
3x SPAX 8 × 65 mm insert (for mounting the Dock to the mounting surface)
1x Sealing membrane (rubber cap) for RS-485 and/or Aux. power supply cables
1x Inlet cable gland
1x Sealing adapter for smaller diameter cables
1x Quick Start Guide
1x Cardboard insert as a drilling template
INCH Core module 2/3 – Output
Output Socket
Box dimensions in mm (L × W × H): 290 x 145 x 145
Content:
1x Output Socket (Shutter) module
1x SPAX 5 × 70 mm screw (for mounting the Output to the mounting surface)
1x M6 washer (for mounting the Output to the mounting surface)
1x SPAX 8 × 65 mm insert (for mounting the Output to the mounting surface)
2x PT 4 × 25 mm screw (for fixing the Output to the Dock module)
1x Quick Start Guide
Output Cable
Box dimensions in mm (L × W × H):
Output cable, 5 m – 290 x 290 x 145
Output cable, 7 m – 290 x 290 x 217.5
Content:
1x Output Cable module (5 m or 7 m)
1x SPAX 5 × 70 mm screw (for mounting the Output to the mounting surface)
1x M6 washer (for mounting the Output to the mounting surface)
1x SPAX 8 × 65 mm insert (for mounting the Output to the mounting surface)
2x PT 4 × 25 mm screw (for fixing the Output to the Dock module)
1x Cable holder (upper and bottom part)
1x Quick Start Guide
INCH Core module 3/3 – Main unit
Box dimensions in mm (L × W × H): 290 x 290 x 145
Content:
1x Main unit module
4x PT 4 × 25 mm screw (for fixing the Main unit to the Dock module)
1x PT 4 × 25 mm (tamper-proof *) screw (for fixing the Front cover to the Main unit)
1x Security screwdriver of the Pin-In-Torx type
1x Quick Start Guide
* Tamper-proof type of the screw is optional, included in the package only upon customer request. By default, the box comes with a standard screw without tamper protection.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.