Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Next »

WIFI Connectivity_1.png

1 – Network to which the charging station is currently connected to.

2 – Other available networks.

3 – Tap Add network manually to manually add a network for connection if a network you are trying to connect to is hidden or not listed.

4 – Tap Connect via WPS to connect to a network via WPS if your network router supports it.


WIFI connection status.png

A – Signal strength indicator wifi1.png wifi2.png wifi3.png

B – Network name

C – Network status

D – Connection indicator wifi-connected.png Connected wifi-connection-lost.png Connection lost

E – Network configuration and details


Network configuration and details open by tapping (blue star) next to the listed connected network.

WIFI Connectivity_3.png

1 – Network name.

2 – Network status.

3 – Tap Disconnect network to disconnect from this network.

4 – Toggle to enable/disable DHCP (Dynamic IP) on this network.

5 – If DHCP is disabled, custom IPv4 and IPv6 settings can be set.

  • No labels