Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

When adding a new IEC 15118 compatible vehicle or EV, this dialog box appears.

10-10_Connection-lost-authentication.png

Plug in your vehicle so the charging station can detect it.
Note that the vehicle needs to be IEC 15118 compatible in order to be detected and added to the EV whitelist.

Dialog_Change-password_6.png

A – Once your vehicle is detected and confirmed, you can give it a name so it is easier for you to recognise on the list. Enter the desired name or label for this vehicle here.

B – Once you have entered the name, tap Confirm to save the vehicle and add it to the whitelist.

If you decide to remove a vehicle from the whitelist, this dialog box appears.

Dialog_Change-password_7.png

C – The vehicle you are removing will be shown here, so you are sure which vehicle you are removing.
D – To remove the vehicle shown, tap Remove.

  • No labels

Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.

Landis+Gyr | Privacy Policy | Disclaimer