This page allows you to make general configuration settings that define the behaviour of your charging station.
1 – General settings refer to the general behavior of your charging station.
2 – This toggle button allows you to enable or disable IEC 15118 functionalities, such as vehicle identification, if your vehicle is compatible. Note that this option may be hidden if your charging station does not come with a IEC 15118 module.
3 – By toggling this button, you can enable or disable the plug locking functionality on your charging station’s output socket. Note that this option may be hidden if your charging station does not support plug locking or if it is a tethered station.
4 – When this toggle switch is applied (green), PEN monitoring is enabled. To ensure your safety, electrical protection should always be applied.
5 – By toggling this button, you can enable or disable the overcurrent protection, which protects the device in case of an overcurrent due to failure on the EV.
6 – This toggle switch allows you to enable or disable automatic synchronisation of your charging station’s internal clock with an SNTP server.