Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 48 Next »

1 – Charging station status LED indicator

2 – Authentication LED indicator

3 – Supplementary LED signaling

4 – Touch button

Charging station status LED indicator

The LED indicator (blue star) (1) can emit green ((blue star), (blue star) ), blue ((blue star) ), or red ((blue star) ) light. It can be steadily ON, flashing, or OFF.

Authentication LED indicator

The LED indicator (blue star) (2) emits white light. When active, the LED is flashing.

Supplementary LED signaling

Three LED indicators (blue star) (3) emit white light. When active, the LEDs are flashing.

Status

Indication of the LEDs

(1)

LED (blue star)

(2)

LED (blue star)

(3)

Supplementary LEDs

Sound

Meaning

Action needed

Result

Authorization

OFF

Flashing

OFF

The charging station is available and is waiting for authorization before proceeding.

Do the authentication/authorization. Use one of the following method:

  • Approach your RFID card to the area of the LED indicators and button.

  • Open the INCH Core App on your mobile device while standing in proximity to the charger. Make sure that Bluetooth connection is enabled on your mobile device.

  • Authorization passed or

  • Authorization rejected

Loading

OFF

OFF

All the LEDs flashing in waves from left to right and back to left, loading animation

The charging station is waiting due to a checking process (e.g., authentication, authorization, upgrading firmware)

No action is needed.

Accepted, confirmed, passed

OFF

OFF

All the LEDs simultaneously flash once

accepted, confirmed, passed

No action is needed.

Declined, rejected

OFF

OFF

All the LEDs simultaneously flash twice

declined, rejected

No action is needed.

Ready to charge

Green (blue star) LED is flashing

OFF

OFF

The charging station is available and ready for charging. Authorization is already completed or not required.

Plug the charging cable into your vehicle and the charger (if not already done so).

Charging starts shortly after both ends of the charging cable are properly connected.

Preparing to start charging

Green (blue star) LED is ON

OFF

All the LEDs flashing in a wave from left to right, loading animation

The charging station communicates with the EV and vice versa just before charging starts.

No action is needed.

After completing the charger and vehicle preparation, the charging session starts.

Charging session

Blue (blue star) LED is ON

OFF

All the LEDs flashing in a waves from left to right

Animation speed is higher when charging is in fast mode.

at the charging session start

The charging station is charging; the charging is in progress.

No action is needed unless you want to:

  • stop charging manually

  • change charging mode (add link) from interactive to fast and vice versa

Charging in progress until interrupted/stopped by the vehicle or charger.

The charging mode is changed from interactive to fast or vice versa if you changed the charging mode.

Charging paused by EV

Blue (blue star) LED is ON

OFF

All the LEDs flashing rapidly and simultaneously

Animation speed is higher when charging is in fast mode.

Charging is paused by EV:

  • EV battery is fully charged

  • EV Schedule setting

Unplug the charging cable if you want to stop the charging session.

If the session is paused by the EV Schedule and you want the session to continue, no action is needed.

In this phase, you can change charging mode (add link) from interactive to fast and vice versa.

The EV’s battery is fully charged.

If the EV Schedule pauses the charging session, it will automatically resume once permitted by the schedule.

The charging mode is changed from interactive to fast or vice versa if you changed the charging mode.

Charging paused by the charging station

Blue (blue star) LED is ON

OFF

The 1st LED on the left flashing

Animation speed is higher when charging is in fast mode.

Charging is paused by the charging station due to:

  • Set schedule,

  • Schedule from a central system,

  • Feedback communication from Core Load Guard,

  • Derating charging current.

Unplug the charging cable if you want to stop the charging session.

If you want the session to continue, no action is needed.

In this phase, you can change charging mode (add link) from interactive to fast and vice versa.

The EV’s battery is partially or fully charged.

When the conditions for continuing the charging session are met, charging continues automatically.

The charging mode is changed from interactive to fast or vice versa if you changed the charging mode.

Charging station is unavailable

OFF

OFF

All the LEDs are OFF

Indicates the charging station is unavailable due to being disabled or there is no power.

If the charging station is disabled, you can enable it via Core App.

If there is no power supply to the charging station, there can be many reasons for power outage. For more information, you can contact your seller’s support.

Charging station is in fault

Example:

Red (blue star) LED is ON

OFF

None, one or more of the LEDs are flashing *

Indicates the specific error occurred. Check the Troubleshooting topic.

Depends on type of error occurred. Check in the Troubleshooting topic, which action is needed.

Depends on type of error occurred. Check in the Troubleshooting topic.

????

* Depends on the type of error occurred. Check in the Troubleshooting topic.

Touch button

The touch button can be used by lightly touching the button for a short time.

By using the touch button, you can switch between Interactive and Fast charging modes. You can change the mode only when the Charging station status LED indicator emits blue – (blue star) .

  • No labels