NM: to be discussed what will be included with Vesna Vujasin and Rosvita Cvikl ČerneličThe INCH Core charging station is designed and tested according to current and past versions of international standards. It complies with the IEC 61851 IEC 61851 (Part 1, Part 21-2) and IEC 61439 IEC 61439-7 international standard, which define conductive AC electric vehicle charging, and supports Mode 3 charging for safe recharging of standard electric vehicles.
Radio equipment type: the The INCH Core is in compliance with:
Radio Equipment Directive 2014/53/EU (RED) *
The Low Voltage Directive 2014/35/EU (LVD) *
The Electromagnetic Compatibility Directive 2014/30/EU (EMC) *
Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment 2011/65/EU (RoHS)
Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)
EU Directive on Measuring Instruments 2014/32/EU (MID) **
* When the charging station contains radio device, it falls under the rules of Radio Equipment Directive (RED) and Low Voltage Directive (LVD) and Electromagnetic Compatibility Directive (EMC) should not be written on the EU Declaration of Conformity. However, with fulfilment of the RED directive, also requirements of LVD and EMC are covered.
** When MID meter is integrated in the charging station.
Click here [insert link to the declaration] for the for the full text of the EU Declaration of Conformity.
The charging station was tested by an accredited third-party laboratory. The performed tests cover all the requirements of the RED, LVD, and EMC directives of the European Union, according to the specifications of the following standards:standards listed in the table below.
IEC 61851-1:2017 (EN IEC 61851-1: 2019) | Electric vehicle conductive charging system – Part 1: General requirements. |
IEC 61851-21-2:2018 | Electric vehicle conductive charging system – Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems |
ETSI EN 301 489-1 V2.2. |
...
3 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services – Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility |
ETSI EN 301 489-17 |
...
V3.2. |
...
4 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services – Part 17: Specific conditions for Broadband Data Transmission Systems;Harmonised Standard for ElectroMagnetic Compatibility. |
ETSI EN 301 489-52 V1.2.1 |
...
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services – Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility. | |
ETSI EN 301 489-3 V2. |
...
CENELEC Guide 32
Guidelines for Safety Related Risk Assessment and Risk Reduction for Low Voltage Equipment Edition 1, 2014-07
Directive 2006/95/EC
Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits
Directive 2015/30/EU (from April 20, 2016)
Electromagnetic Compatibility (EMC) Directive
Directive LVD 2006/95/ED (through April 19, 2016)
EMC
EMC Directive 2004/108/EC (through April 19, 2016)
EMC Directive 2014/30/EU (from April 20, 2016)
EN 50065-1:2011
EN 50065-4-2:2001
EN 50065-4-7:2005
EN 60068-1:2014
EN 60309-1:1999
EN 60309-2:1999
EN 60335-1
EN 60335-2-15
EN 60529:1991
EN 60947-1:2007
EN 60947-2:2006
EN 60947-2:2017
EN 60947-3:2009
EN 60947-4-1:2010
EN 60950-1:2006
EN 61000-6-1:2007
EN 61000-6-2:2005
EN 61000-6-3:2007
EN 61000-6-4:2007
EN 61008-1:2004
EN 61008-1:2012
EN 61009-1:2004
EN 61009-1:2012
EN 61439-1:2011
EN 61508-1:2010
EN 61851
EN 61851-1:2001
EN 61851-1:2011
EN 61851-1:2019
EN 61851-21:2002
EN 61851-22:2002
EN 62079 RoHS
EN 62196-1:2012
EN 62196-1:2014
EN 62196-2:2012
EN 62196-3:2014
EN 62262:2002
GPSD
HD 60364-4-42:2011
IEC 60335
IEC Guide 116:2018
IEC TS 61439-7:2018
IS0/IEC Guide 51:2014
LVD
REACH
3.2 | ElectroMagnetic Compatibility (EMC) standard for radio equipment and services – Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility. |
EN 60529:1991 + A1:2000 + A2:2013 | Degrees of protection provided by enclosures (IP Code), 1991; Amendment 1, 2000; Amendment 2, 2013 |
EN 62262:2002 |
List of standards and references
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code). | |
IEC 62196-1:2022 | Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 1: General requirements. |
IEC 62196-2:2022 | Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories. |
IEC 62196-3:2022 | Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers. |
IEC 60364-7-722:2018 | Low-voltage electrical installations – Part 7-722: Requirements for special installations or locations – Supplies for electric vehicles. |
IEC 61439-7:2022 | Low-voltage switchgear and controlgear assemblies – Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations. |