...
 | Single-phase or three-phase EV charging station for | |
...
Maximum charging power:
One-phase installation: 7.4 kW (1 × 32 A)
Three-phase installation: 22 kW (3 × 32 A)
...
Charging outlet type:
Type 2 socket
Type 2 tethered charging cable
...
any electric vehicle with a Type 2 charging connector (identifier C). | ||
Electrical characteristics | ||
Single-phase device | Input | 230 V~; 1W+N+PE; 50/60 Hz; 32 Amax; 7.4 kW |
Output | 230 V~; 1W+N+PE; 50/60 Hz; 32 Amax; 7.4 kW | |
Three-phase device | Input | 230/400 V~; 3W+N+PE; 50/60 Hz; 32 Amax; 22 kW |
Output | 230/400 V~; 3W+N+PE; 50/60 Hz; 32 Amax; 22 kW | |
Types of system earthing | TN, TT | |
Rated impulse withstand voltage (Uimp) | 2500 V – OVC II (4000 V and OVC III is achieved with installed SPD) | |
Rated insulation voltage (Ui) | 230/400 V | |
Rated current of each circuit (Inc) | 32 A | |
Rated peak withstand current (Ipk) | 4500 A | |
Rated conditional short-circuit current of assembly (Icc) | 3000 A | |
Rated diversity factor (RDF) |
| |
Device power consumption | 10–15 W (highest measured value of full configuration) | |
...
Environmental characteristics | ||
Ingress protection | IP56 | |
Impact protection | ||
...
Ingress protection: IP56 protection against dust and liquid penetration (by IEC 60529)
...
Electrical protection:
DC fault current sensors 6 mA (default)
PEN protection (UK edition)
Other protection installed externally upstream
...
Communication technologies allow BEMS, cloud integration and ensure communication stability.
Connectivity
Wi-Fi – for WLAN connection
Bluetooth & Wi-Fi – for Smartphone mobile app connection
Sub-1 GHz – for wireless connection with Load Guard (when used)
EV communication:
IEC 61851
ISO 15118 – supported by design, not available at launch
Local communication protocols, Smart building integration: MQTT, Modbus RTU, OCPP
Cloud connection: OCPP (1.6 starting version)
...
Energy meter:
embedded class 2 energy meter
can be connected with a MID compliant meter
...
Modes of charging:
Fast
Interactive
...
User identification: Smartphone app, RFID
...
User interface: LED and sound signals, press button, smartphone app
...
Material: Polycarbonate reinforced with glass fibers, TPE gasket
...
Colour: Light grey (RAL 7001)
...
Modularity – the charging station consists of three modules – enables simple and fast product installation:
Module 1 – Dock (Wallmount)
Module 2 – Output socket without shutter / Output socket with shutter / Output cable
Module 3 - Main unit
The charging station offers versatile connectivity options to suit various energy management systems:
...
integration with Local Energy Management System (LEMS)
...
integration with Cloud Energy Management System (CEMS)
...
IK10 | ||
Protection class | Class I equipment | |
Pollution degree | Pollution Degree 3 | |
Electromagnetic compatibility (EMC) |
| |
Frequency bands and radio power | ||
Wi-Fi | Frequency band: 2.4 GHz Transmitting power: up to 20.5 dBm (adjustable) | |
Sub-GHz | Frequency bands: 169 MHz, 410–510 MHz, 868 MHz, or 915 MHz Transmitting power: 14 dBm | |
RFID module | Frequency band: 13.56 MHz (HF) Transmitting power: up to 8 dBm (ISO 14443 and ISO 15693) | |
Other classification and characteristics | ||
AEVCS | Assembly intended for charging stations for electric vehicles | |
Installation location | Indoor and Outdoor | |
Mounting method | Stationary equipment, Wall-mounted assembly | |
Location accessibility | Location with restricted access or non-restricted access | |
Mechanical resistance | Medium/High | |
Installation | Must be performed by qualified personnel | |
Operation | Allowed to ordinary persons | |
Electrical installation protection | ||
Dimensions | ||
Dimensions of assembled charging station (in mm) |  H2 - to the bottom of the cable gland with a spiral | |
Main unit + Dock | 257 × 273 × 115 (W × H1 × D) | |
Main unit + Output socket + Dock | 257 × 401 × 115 (W × H2 × D) | |
Main unit + Output socket shutter + Dock | 257 × 413 × 120 (W × H2 × D) | |
Main unit + Output Cable + Dock | 257 × 387 × 115 (W × H2 × D) | |
Mass | ||
Mass (assembled charging station) | 3.4 kg to 7 kg | |
Temperature | ||
Operational | -25 °C to +85 °C | |
Ambiental | -25 °C to +50 °C | |
Storage | -30 °C to +85 °C | |