1 – Network to which the charging station is currently connected to.
2 – Other available networks.
3 – Tap Add network manually to manually add a network for connection if a network you are trying to connect to is hidden or not listed.
4 – Tap Connect via WPS to connect to a network via WPS if supported by your network router supports it.
A – Signal strength indicator 
B – Network name
C – Network status
D – Connection indicator 
Connected 
Connection lost
Network configuration and details
open by tapping
next to the listed connected network.
1 – Network name.
2 – Network status.
3 – Tap Disconnect network to disconnect from this network.
4 – Toggle to enable/disable DHCP (Dynamic IP) on this network.
5 – If DHCP is disabled, custom IPv4 and IPv6 settings can be set.