Charging station authorization options can be set in the MyINCH web interface. One of the options is authorization with an RFID card.
Click the
navigation menu in the top left corner.Select
...
Configuration
...
.
On the User tab, click the drop-down arrow and choose Charging authorization.
...
On the right panel, Charging authorization options
...
appear
...
.
Under Supported Identification Types, enable RFID by
...
ticking the
...
Enabled checkbox.
If needed, enable the other two options:
- Revert Tag ID bytes
...
– an option used by some central system operators that read tag ID bytes in the reverse order.
- Stop session directly
...
– used when the user wants to stop the charging session by swiping the RFID card.
...
Scroll down to the bottom of the
...
panel and click Save.
Because the settings were changed, the charging station now needs to be restarted.
Return to the
navigation menu and select
...
Diagnostics
...
/ Restart device
...
. In the pop-up window, confirm with Yes.
Wait for the station to carry out the restart.After the restart, open MyINCH web interface and re-connect to the charging
...
station.
10. Open the navigation menu
...
.
11. Select the Configuration tab.
12. On the User tab, click the drop-down arrow and select Local users.
...
On the right panel, Local users options appear.
13. To add a new local user, click Add new.
...
The My profile pop-up window appears.
14. In the pop-up window,
...
enter First name and Last name and click Save.
To prevent the chosen user from accessing the charging station,
...
tick the
...
Blocked (prevent access) checkbox. The User identifications pop-up window
...
appears.
15. In the pop-up window, click Add and then select Register card now by swiping it.
There are also two additional options for adding identification:
- Get card from past failed authorizations
...
– Select an RFID card from failed authorizations that are stored on the charging station.
- Add it manually
...
– Manually input the RFID tag ID bytes.
A pop-up window appears, prompting you to swipe the new RFID card.
16. Swipe the desired RFID card on the charging station to hear a beeping sound and click I did it.
17. In the next window, click Select next to the appropriate RFID card ID to view and edit details such as card status, card number, expiration date.
Click Save to confirm and then close the User identifications window.
The newly added user will appear on the right, under Local users.
By selecting the card
...
icon next to the name of the user, you can view and edit all identifications for the chosen user.
You are now able to authorize with the selected RFID card and start charging.
| Widget Connector | ||||||
|---|---|---|---|---|---|---|
|