...
1 – NI AVAILABLE Based on the way your charging station is connected to your internal grid, it can detect if it is a single or a three phase installation. Connection for each phase is listed below.
2 – NI AVAILABLE Tap Phase configuration to reassign connections for each phase.
3 – OBSTAJA IN JE AVAILABLE Toggle to choose whether the static limit applies to all phase configurations.
The options below allow you to set a separate limit for when the charging station is charging in a single or a three phase mode.
NI ŠE AKTUALNO The charging station installed as a three phase charging station will switch to the single phase mode if the total power current drops to below <6A>.
→ TO BO AKTUALNO ŠELE, KO DEVELOPMENT USPE NAREDITI PHASE SWITCHING
...