Page Comparison

1 – Select a communication protocol you want to use to communicate with the central system.

2 – The state of your connection to the central system is shown in the status line.

3 – Used for authentication.

4 – Add the certificate file from your phone’s local storage by tapping the plus icon on the right side of the field.

za security del komunikacije

s strani back-enda

5 – Frequency of sending after a timeout.

Retry interval: kok pogosto po timeoutu probaš poslat

METERING – Frequency of providing data on the current charging sesssion.

Select which metering data will be shared with the central system and how often the measurements are taken.

metering

kolk pogosto sporočaš vrednosti o polnjenju, podatki o trenutni seji

nekateri sistemi za nadzor porabe uporabljajo ocpp

1 – Select a communication protocol that you want to use to communicate with the central system.

2 – The state of your connection to the central system is shown in the status line.

3 – Used for authentication.

4 – Add the certificate file from your phone’s local storage by tapping the plus icon on the right side of the field.

5 – Select which metering data will be shared with the central system and how often the measurements are taken.

če izgubi povezavo z back-endom, postaja preklopi na 6 A

6 – podobno kot reconnect interval, povezave ne izgubiš, ampak jo refresha

7 – ?

MQTT še ni implementiran

We need more technical input here