1 – Network to which the charging station is currently connected to.
2 – Other available networks.
3 – Choose Add network manually connect to it manually if a network you are trying to connect to is not listed or if it is hidden.
4 – Tap Connect via WPS to connect to a network via WPS if your network router supports it.
A – Signal strength indicator 
B – Network name
C – Network status 
Connected 
Connection lost
D – Connection indicator
E – Network configuration and details
1 – Network name.
2 – Network status.
3 – Tap Disconnect network to disconnect from this network.
4 – Toggle to enable or disable DHCP (Dynamic IP) on this network.
5 – If DHCP is disabled, custom IP4 and IP6 settings can be set.